Pioneer UDP-LX500 Region Free

New product

£832.50

Pioneer UDP-LX500 4K UHD player with Region Free DVD & Multi Zone Blu-ray supports 4K HDR, Dolby Vision disc formats and features SACD playback. 

More details

Add to wishlist

Pioneer UDP-LX500 UHD Blu-ray player with Region Free for DVD & Multi Zone for Blu-ray. This is a modification for the Pioneer that enables the player to play movies from different regions or zones. The DVD and Blu-ray region code change is easily done with the remote control from the setup menu, there is no need to reboot the player.

Double Layered Chassis
The UDP-LX500 features a 1.6mm rigid double-layer chassis with 3mm thick steel base plate and an internal layout that creates a low centre of gravity, minimizing mechanical noise from the rotating BD-Rom drive. The BD-Rom drive employs a honeycomb shaping in the steel top plate to ensure high structural strength. This double-layer chassis also provides the noise cancelling of external vibrations and providing superior disc reading.

Three-Section Internal Layout
Pioneer has paid specific attention to the internal layout of the UDP-LX500 with an arrangement that separates the power supply, drive/digital processing and audio circuitry into 3 specific blocks. The advantages are reduced electrical and magnetic interference between the power supplies and sensitive digital and audio circuits.

6-Layer PCB Main Board
A multi-layered circuit board with 6 layers is used for the main board (video/digital processing) which enables the shortest path for digital signals and lowest ground impedance. This improves the S/N of audio and video signal processing for a highly accurate transfer of both video and audio data.

Analogue/Digital Audio Outputs
The analogue audio section features a 2-channel RCA output and adopts the AKM AK4490EQ premium DAC chip. The DACs low-pass filter comprises of a pair of JRC 5532 audio op-amps with a capacitor coupled output stage. In addition to the analogue outputs, there is also a coaxial S/PDIF and optical digital output for connecting the LX500 to an external DAC.

USB, HDMI Digital Inputs/Outputs
The LX500 is equipped with two USB ports, one on the front of the player and a second on the rear panel. There are also 2 HDMI outputs, ‘Main’ for video output and ‘Sub’ which outputs digital audio only.

Audio Features

› Highly Precise D/A Conversion
› Direct Function for Pure Analogue Audio Output
› PQLS Jitter-less Sound Transmission via HDMI (with compatible AV Receiver)
› Three-Block Internal Layout (Power Supply, Drive/Digital Processing, Analogue Audio)
› Ultra-Rigid Construction without Radiation Holes
› Double-Layered Chassis Reinforced with 3 mm Steel Plate for Rigidity and Low Centre of Gravity
› 6-Layered Main Circuit Board for High S/N Ratio
› Rigid & Quiet UHD BD Drive
› Honeycomb Mechanism Drive Cover
› Acoustic Damper Tray
› Float-Mounting Structure

Video Features

› Ultra HD Blu-ray Playback
› SDR/HDR Preset Mode for Optimal Performance for the Display
› Video Adjust
› HDR10
› Dolby Vision (Low Latency Compatible)
› 36-bit Deep Colour/”x.v.Colour”
› Highly Precise D/A Conversion
› Dual HDMI Output
› Three-Block Internal Layout (Power Supply, Drive/Digital Processing, Analogue Audio)
› Ultra-Rigid Construction without Radiation Holes
› Double-Layered Chassis Reinforced with 3 mm Steel Plate for Rigidity and Low Centre of Gravity
› 6-Layered Main Circuit Board for High S/N Ratio
› Rigid & Quiet UHD BD Drive
› Honeycomb Mechanism Drive Cover
› Acoustic Damper Tray
› Float-Mounting Structure
› Playback Media
› BD-ROM (UHDBD/3D BD/BD)/BD-R (DL)/BD-R LTH/BD-RE (DL)
› DVD-ROM (DVD-Video/DVD-Audio)/DVD-R (DL)/DVD-RW/DVD+R (DL)/DVD+RW
› Audio CD (CD-DA/SACD)/CD-ROM/CD-R/CD-RW
› USB Memory/HDD

Specifications

› Power Requirements: AC 110-240 V, 50/60 Hz
› Power Consumption: 28 W
› Power Consumption During Standby:  0.45 W (Full)/1.3 W (Network Standby On)
› Dimensions (W X H x D): 435 x 118 x 337 mm
› Weight: 10.3 kg

4 other products in the same category: